Prepare the camera.

Which digital cameras can be used?

This Case (PT-026) can only be used with the Stylus 500/µ DIGITAL 500 camera.

Turn on the camera.

Press the digital camera’s power switch to turn it on. When the camera is left unused for about 3 minutes, it will enter the standby mode. Normal operation can be restored by pressing any button including the zoom button. If the camera is left unused for about 15 minutes, the camera turns off to prevent unnecessary battery consumption. In this case, press the power switch again to turn on the camera.

Check camera operation.

Confirm camera operation as described in the camera’s operation manual. After completing the check, press the camera’s power switch to turn it off.

Open the Case.

Insert the buckle opener of the accessory into the buckle opening lever as shown in the figure (in direction ) Pull the buckle opener slowly (in direction ). When not using the buckle opener, hold the buckle opening lever with your thumb and index finger from the side and pull it up slowly.

E-15