Olympus PT-043 Open the Case., Load the digital camera.

EN17
En
Check the camera’s operation.
Check if the camera functions normal ly as described in its instruction
manual. After checking, press the camera’s POWER button to turn it OFF.
Open the Case.
Use the provided O-ring remover as described below.
1Insert the hook section below the buckle lock/unlock lever.
2Slowly pull the O-ring remover.
3If the O-ring remover is not available, push the buckle lock/unlock lever
from the left and right with your thumb and index finger, and pull up the
lever gently.
Load the digital camera.
1Confirm that the digital camera is OFF.
2Gently insert the digital camera into the Case.
CAUTION:
If the digital camera is not inserted properly, it may not be possible to s eal
the case so that it is airtight. Alternatively, some controls may become
inoperable. Note that imperfect sealing may result in water leakage.
PT-043_EN.book Page 17 Friday, December 7, 2007 5:30 PM