Olympus PT-043 7. Maintaining the Waterproof Function

EN29
En
7. Maintaining the Waterproof Function
Whenever you open the rear lid of the Case, always be sure to perform
the O-ring maintenance operation as described below.
Remove the O-ring.
Open the Case and remove the O-ring from the Case.
Removal of the O-ring
1Insert the O-ring remover between the O-ring and the O-ring groove.
2Slip the tip of the inserted O-ring remover below the O-ring.
(Be careful not to scratch the O-ring groove with the tip of the O-ring
remover.)
3Hold the O-ring with your fingertips after it has come out of the groove
and remove it from the Case.
PT-043_EN.book Page 29 Friday, December 7, 2007 5:30 PM