Problems with Printed Pictures | Olympus Zoom 80 Wide DIX instruction

The viewfinder is out of focus.

Diopter dial is not adjusted.

Adjust the diopter dial until image is clear. (p. 9)

PROBLEMS WITH PRINTED PICTURES

The picture is out of focus.

The camera moved when the shutter release button was pressed.

Hold the camera correctly and press the shutter

release button gently. (p. 15)

The subject was not within the viewfinder's

autofocus mark.

Position the subject in the center of the autofocus mark. (p. 22)

The lens and autofocus windows were dirty. Clean the lens and autofocus windows.

61

Image 61

Olympus Zoom 80 Wide DIX manual Problems with Printed Pictures

Contents

Instructions Zoom 80 Wide DIX Keep the Batteries Away from Fire Photographs Symbols used in this manual Preparations Basic Operations Advanced Techniques Names and Functions of Parts Tripod socket Back coverBack cover release p Green lamp Orange lamp Orange lamp Viewfinder DISPLAY/LCD PanelSimultaneously as shown USINGTHESTRAP/SOFTCASE Diopter Adjustment Outline of Operations LCD panel reads p Open the lens barrier until you feel a click pMake sure the exposure counter on Page Open the battery compartment cover Loading the BatteryShown and close the battery Are displayed normally Blinks and other Checkingthe BatteryBe replaced immediately With its flash positioned at the top Incorrect Points to RememberCorrect Vertical position, hold the camera Halfway to lock the focus Practice before loading the filmDepress the shutter release button Make sure Green lamp next to the viewfinder lights Slide the back cover release upward to Open the back cover Loading the Film Do not touch the plastic parts near the take-up spool First frame Make sure Exposure counter on the LCD panel reads Open the lens barrier until you feel a clickIf blinks in the exposure counter, as shown on the left Taking Pictures Telephoto Depress the shutter release button Position the autofocus mark on your subjectDo not look directly at the sun through the viewfinder Depress the shutter release button fully When the subject is extremely close toWorking Distance Focus range of the camera is 0.8 m 2.6 ft to infinity Marks Close-up Correction When the main subject is not within Using the Focus LockTo avoid taking out of focus pictures Green lamp lights Reposition your subjects in the picture Shutter release button fullyFrame while keeping the shutter release Button depressed halfway. Then press Close the lens barrier slowly After ShootingAutomatically Carefully. The lens and flash will retract Rewinding the film before the end of the roll Unloadingthefilm Taking Panorama Pictures Set the switch to Panorama to engage Illustration becomes the image area CLOSE-UP Correction in the Panorama ModeAt about 0.8 m 2.6 ft. the shadedarea Center For Film Shot in Both Panorama and Standard Modes For Film Shot Only in Panorama Mode How to select the flash mode Using the Flash ModesThis camera has six flash modes. Select Conditions and needs Fires regardless of available light. p Flash does not fire. pScene in the background. p Against a night background. p 28 mm 80 mm Auto Flash100 200 Effectiveness of red-eye reduction varies depending RED-EYE Reducing Flash Automatically selected in low-light situations when Twilight or night scenes Closing the lens barrier restores the Auto Flash mode When you want to fire the flash every shotFILL-IN Flash Forced Activation Flash mode, the flash fires regardless Night Scene Flash Photographed against a night background Cancel the Spot mode Position the autofocus mark On your Spot ModeSubject, and press the shutter release button halfway Autofocus mark Reposition your subject in the picture Focus and exposure can be adjusted at 10 sec. Selftimer indicator lights Sec. Blinks SelftimerButton Aim at your subject, and press Press the button. isdisplayed on the LCD panel Remote Control optional Remote control may not work when the subject is Correcting the Data Press the Mode button for two secondsOr longer Press the SET button to correct the year Minutes Press the Mode button againRepeat steps 2 and 3 to set the hour Month indication will start blinking Printing the Date and Time Choose the desired mode with the Mode buttonThere is something whitish or tinged with orange where No data What should I do when both the orange and green Questions and AnswersHow long will the battery last? Why does the flash get hot? Care and Storage Do not shake or shock the camera Do not leave the camera on or near aLens Do not apply excessive force to the zoom Camera again. Strong electrical fields can also interfere Temperature to change slowly. Once the camera hasThis camera is not suitable for professional use or for use Camera correctly Contact your nearest Olympus service center Do not touch the rubber gasket on the batteryCompartment cover or the rubber gasket on Gaskets When the camera is not used for an Battery Handling Contact a Doctor Immediately Keep the remote control out of the reach Remote Control optional HandlingChildren. If a child swallows the remote Troubleshooting Page Page Problems with Printed Pictures Page Page Change the data mode to another setting. p Autofocus indicator and flash indicator SpecificationsPossible. Focusing range 0.8 m 2.6 ft ~ Shutter Programmed electronic shutter Is closed Film advance Automatic film winding Film with less than ISO 50, film speed is set To ISOPage Test for second numeral 4 Equipment is sprayed from Short description Protected against splashing water Specifications for Date Unit Olympus America INC