Omega DPF78, DPF76, DPF75 manual Programming, Press, Remarks, Scaling, Enter

PROGRAMMING

STEP	PRESS	DISPLAYfactordpfa	REMARKS
1			This section of the menu is used to set
SETTING			up the scaling factors for inputs A & B.
	PRGM
SCALING
			This sets the decimal for	factor A.
FACTORS
			Press the arrow key under the digit
			where the decimal is desired. To clear
	ENTER
			the decimal, press the arrow key fur-
			thest to the right (PRGM) .
			This is the scaling factor for input A. To
		hicps	change, press the arrow key under the
		#####	digit(s) to change. Press ENTER to
	ENTER
			enter the displayed value.
THIS SECTION			This section will only appear in the
			RATE only version. Press the PRGM
WILL ONLY
APPEAR IN THE		lodpfb	key to choose HIGH CPS (0-9.99KHz)
RATE METER	ENTER	or	or LOW CPS (0-40Hz).	Press the
ONLY VERSION			ENTER key to enter the displayed
(DPF78)			choice.
			This sets the decimal for factor B.
			Press the arrow key under the digit
	ENTER		where the decimal is desired. To clear
			the decimal, press the arrow key fur-
			thest to the right (PRGM) .
			This is the scaling factor for input B. To
		#####	change, press the arrow key under the
	ENTER		digit(s) to change. Press ENTER to
			enter the displayed value.

10