Omega Engineering CIO-DAC08, CIO-DAC16 Analog Output Range Switches, Simultaneous Update Jumper

.

XFER

# # (UPDATE)

Individual updates per DAC

(Two Channels)

XFER

# # (UPDATE)

Simultaneous updates from all DACs Jumpered to XFER

INDIVIDUAL UPDATE / SIMULTANEOUS TRANSFER JUMPER

J1 to J8 - One per pair of channels.

Figure 3-3. Simultaneous Update Jumper

3.5 Analog Output Range Switches

The analog output voltage range of each channel can be set with a set of five ganged DIP switches. The switch blocks are located on the board below the calibration potentiometers. The switch blocks are labeled 0 to 15 (0 to 7 on the CIO-DAC08) and individual switches are labeled 1 through 5.

Set the switches for each individual channel as shown in Figure 3-4..

	1		2	3	4	5
RANGE
+/-10V		UP	DN	UP	DN	DN
+/-5V		UP	DN	DN	UP	DN
+/-2.5V		UP	DN	DN	DN	UP
0 to 10V		DN	UP	UP	DN	DN
0 to 5V		DN	UP	DN	UP	DN
0 to 2.5V		DN	UP	DN	DN	UP

Figure 3-4. Output Range Switch

5