4.1 iCONNECT Software

The iServer may also be assigned an IP Address by using the iCONNECT software.

a)Download the iCONNECT software from the website listed in this manual.

b)Install iCONNECT software on a networked PC. This software is compatible with Windows 95, NT, 2000, and XP.

c)Use iCONNECT to assign an IP address to the iServer and access its web pages for configuration. You can also use any standard web browser to access the iServer’s web pages. Consult with your IT department for obtaining an IP address.

Place the IP address in this box

Take the MAC address from the label attached to the bottom of the iServer and place it in this box

Click here to send the above IP address to the iServer

After the IP address is assigned to the iServer, click here to access it’s web pages

Figure 4.2 Assigning an IP Address using iCONNECT

d)To access the iServer for Configuration:

Click on the “View Webpage” button, you will access the iServer’s home page, refer to Section 4.3 for details.

Figure 4.3 Accessing the iServer’s Home Page Menu

12

Page 16
Image 16
Omega Engineering i.BTX-M manual ICONNECT Software, Assigning an IP Address using iCONNECT