29
4.5.2 HTTPGET and ARPto setup Device IP Address
Use the iCONNECT software, which may be downloaded from our website, to
do these IP changes whenever possible.
Use ARPfirst to assign the mac address to a static IP address in computer arp table by
this command:
apr –s 192.168.1.200 00-03-34-00-00-06-b6
Then use the following command to assign new IP to the device:
Httpget –r –S "00000000" 192.168.1.200:1
where:
“00000000” is admin. password. If the password is wrong, the unit will ignore the new IP.
If the new IP is taken, you will get the message " New IPis Assigned" after the httpget
command. The device will reset automatically.
“192.168.1.200” is an example of an IP addresss. It is replaced with an IPaddress
suitable for your network
“00-03-34-00-00-06-b6” is replaced with your iServer product MAC address.