Omega Engineering OS533E Real Time Modes

2-9

Using the Handheld Infrared Thermometer 2

Table 2-1. Functional Flow Chart when the Trigger is Pulled (Real Time Mode)

Press to... to... Press or to...

FUNC LOCK

F

C

F

C

DISPLAY

MODE:

Press

Display shows:

Emissivity Go to

Set Emissivity

Current temperature Lock or unlock

Distance (feet or meter) Go to Trigger LCK

Current temperature

Laser status Go to Set laser to

Current temperature Flashing or On

Maximum temperature Go to Press to turn on/off

Current temperature LCD backlight

Minimum temperature Go to

Current temperature Reset Maximum, Press to change

Differential temp Go to Minimum, Diff.

from °F to °C or feet to meter

Current temperature Average temps and vise versa

Average temperature Go to

Current temperature

High alarm set point Go to Enable/Disable Set High Alarm set point

Current temperature HAL

Thermocouple temp Go to –––––– Turn on LCD Back lite

Current temperature Change °F to °C

Low alarm set point Go to Enable/Disable Set Low Alarm set point

Current temperature LAL

Ambient target temp Go to Enable/Disable Set Ambient Target temp

Current temperature ATC

Data Trans. Interval Go to Enable/Disable Set Data Transmission

Current Temperature PRN interval (Logging)

Memory location Go to Store temp data –––

Current temperature

Logging Go to Turn on/off

–––

Current temperature Logging

Real Time Modes

NOTE: The unit of measure (°F or °C) flashes during Real Time Mode.

OS530LE, OS530HRE

OS532E

OS533E

OS534E, OS523E, OS524E

Contents

Main Users Guide Servicing North America: U.S.A.: Canada: For immediate technical or application assistance: U.S.A. and Canada: Page Page Page Page Page General Description 1 1.1 Introduction Page * The temperature accuracy is 1% of Rdg or 2C (3F) whichever is greater. Page 1.2 Parts of the Thermometer 1.2.1 Front of the Thermometer General Description 1 1-5 1 Table 1-2. Display Details Key Description Page Page Using the Handheld Infrared Thermometer 2 2.1 How to Power the Thermometer 2.1.1 Battery Operation If the icon flashes, the batteries must be replaced with fresh batteries immediately. 2.1.2 ac Power Operation 2.2 Operating the Thermometer Using the Handheld Infrared Thermometer 2 Figure 2-4 Field of View OS533E, OS530HRE Figure 2-5 Field of View OS534E, OS523E-1 ** Measurement distance is from the outside surface of the rubber boot. Using the Handheld Infrared Thermometer 60:1 SPOT DIA.* (MM) SPOT DIA.* (IN) Figure 2-7 Field of View OS523E-2 2-4 Figure 2-6 Field of View OS53xE-CF 2-5 Using the Handheld Infrared Thermometer 2 Figure 2-8 Field of View OS523E-3 D:S Figure 2-9B Field of View OS534E-LR, OS523E-LR Figure 2-9 Field of View OS524E 110:1 2.2.1 Measurement Techniques Page 2.3 Real Time Mode (Active Operation) Real Time Modes NOTE: The unit of measure (F or C) flashes during Real Time Mode. Page 2.3.1 Adjusting Emissivity 2.3.2 Using the LOCK Function 2.3.3 Using the Trigger Function 2.3.4 Using the Distance Function Page Using the Handheld Infrared Thermometer D:S BEAM DIA.* (CM) BEAM DIA.* (IN) 6.5:1 Figure 2-17. Field of View of Distance Meter HH-DM Figure 2-18. Line of Sight of the Infrared Thermometer vs. Distance Meter and Built-in Module 2.3.5 Laser Sighting Status 2.3.6 Calculating Temperature Values 2.3.7 Changing the Temperature from F to C (or vice versa) 2.3.8 Turning on the Display Backlighting 2.3.9 Thermocouple Input (OS532E, OS533E, OS534E) 2.3.10 Using the Alarm Functions Page 2.3.11 Using Ambient Target Temperature Compensation (OS533E, OS534E, OS523E, OS524E) Page 2.3.12 PC User Application, OS530 Series Operation Page Settings Menus Page 2.3.13 PC Interface Commands Page 2.3.14 Storing Temperature Data on Command (OS534E, OS523E, OS524E) 2.3.15 Logging Temperature Data in Real Time (OS523E, OS524E,OS534E) on 2.3.16 Erasing the Temperature Data from Memory Start Sleep Mode Recall Modes NOTE: The unit of measure (F or C) stays on (does not flash) during Recall Mode. 2.4.1 Reviewing the Last Parameters 2.4.2 Reviewing Previously Stored Temperature Data (OS534E, OS523E, OS524E) Laser Sighting 3 3.1 Warnings and Cautions Refer to the inside back cover for product warning label. 3.2 Description 3.3 Operating the Laser Sighting 3.4 Laser Sighting Status Page 4.1 Sighting Scope Sighting Scope 4 4.2 Installing and Operating the Sighting Scope Page Maintenance 5 5.1 Replacing the Batteries Safety Warning 5.2 Cleaning the Lens 5.3 Calibrating the Thermometer 5.4 Ser vicing the Laser Sighting Troubleshooting Guide 6 Page Page Page Specifications 7 (Specifications are for all models except where noted) Page Page Page Page Page Glossary of Key Strokes 8 Page Appendix: How Infrared Thermometry Works A Thermal Radiation OR Blackbody Spectral Distribution Calculating Temperature = 2.898 T Optics Field of View Appendix: Emissivity Values B METALS Material Emissivity () B NONMETALS Material Emissivity () Appendix: Determining an Unknown Emissivity C Method 1 Method 2 Method 3 Method 4 Method 5 Page Index I A B C D E F G H I J M O P R S WARRANTY/DISCLAIMER RETURN REQUESTS /INQUIRIES Warning and Certification Label Label Location- refer to Section 3.2 Warnings and Cautions - refer to Section 3.1 OMEGASCOPE Where Do I Find Everything I Need for Process Measurement and Control? OMEGAOf Course! Shop online at omega.com SM TEMPERATURE PRESSURE, STRAIN AND FORCE