Using the Handheld Infrared Thermometer 2
Settings Menus
In the settings menu, you can do the following:
•Select audible indication. The PC will beep every time the temperature goes into alarm conditions.
•COM port auto detect. The program shows the available COM ports for your selection.
•Selecting the “Show History Viewer”, provides a log of all the events happening with the application such as high & low alarm events, start & stop of the application, etc.
•Selecting the “Save to File”, allows you to save the charted data coming from the thermometer to a data file. When you stop recording, the program will ask if you would like to save the data.
•Select your chart time base from 1 minute per frame up to 1 day per frame.
•Select “Auto Scale” or specify your upper & lower Y axis values for custom scaling.
•Set the following parameters:
1.Emissivity
2.High and Low alarm set points as well as enable/disable
3.Temperature Engineering unit (ºF or ºC)
4.Data transmission interval in seconds
5.Target Ambient temperature
•Download the recorded temperature data from the thermometer to a text file.
•Erase the recorded temperature data from the thermometer.
