Omega Engineering OS533E manual Storing Temperature Data on Command OS534E, OS523E, OS524E

Using the Handheld Infrared Thermometer 2

2.3.14Storing Temperature Data on Command (OS534E, OS523E, OS524E)

°F

The thermometer can store up to 800 temperature data points on command. This data is stored in the non-volatile memory, so removing the batteries will not affect or erase this data. To store temperature data:

1.Aim at the target and pull the trigger and press the

LOCK key to lock the trigger. The icon will appear on the display.

2.If necessary, press the key to increment the target emissivity or press the C F key to decrement the target emissivity.

3.Press and hold the FUNC key until the Memory Display Mode (MEM) appears.

4.Press the LOCK key to store the target temperature at the memory location indicated. You will hear a beep to verify that the data is stored. Then the memory location is incremented by one.

5.After all data is taken, press and hold the FUNC key until the Emissivity Display Mode (E) appears.

6.Press the LOCK key to unlock the trigger or pull the trigger twice at any time.

2-27