Omega Speaker Systems HH303 manual BYTE first two BCD code of main window value

Models: HH303

1 14

Page 13

Type K J Thermometer

bit3:1→sub window value is OL , 0→not OL

bit4:1→sub window value is minus, 0→sub window value is plus. bit5:1→6th byte and 7th byte represent #### 0→6th byte and 7th byte

represent ###.#

bit7 bit6:

00→Main window is T1-T2,sub window is T1

01→Main window is T1-T2, sub window is T2 10→Main window is T1, sub window is T2 11→Main window is T2, sub window is T1

4th	BYTE: first two BCD code of main window value.
5th	BYTE: last two BCD code of main window value
6th	BYTE: first two BCD code of sub window value.
7th	BYTE: last two BCD code of sub window value.
8th	BYTE: The last byte is the end byte , it value is 3, first and last
	byte are used to check frame error.

Image 13

Contents

User’s Guide TEMPERATUREOMEGANETTE HH303 Type K J ThermometerOMEGAnet On-Line Service WARRANTY/DISCLAIMERM-3549/1299HH303 1/23/00 755 PM Page omega.comTMC O N T E N T S III. Symbol Definition and ButtonIV. Operation Instructions Type K J ThermometerResolution II. SpecificationsI. Introduction Numerical DisplayDimension 184 64 30mm Temperature CoefficientAccessory Power requirementIII. Symbol Definition and Button Location Type K J Thermometer $34$556 $/!67*83-6 9&956 4.3 Selecting the Temperature Scale 4.1 Power-UpIV. Operation Instructions 4.2 Connection the Thermocouples4.10 Low Battery Condition 4.9 Auto Power Off4.8 MAX/MIN/AVG Operation for Main Display Command T Command KCommand M 4.11 Digital OutputCommand C Command RCommand A 1nd BYTEType K J Thermometer represent ###.#BYTE first two BCD code of main window value K,J Thermometer HH302 calibrate procedure Calibration ProcedureK,J Thermometer HH303 calibrate procedure Omega