4.3.7.6.1Display Color Examples (continued)
Example 3:
Output 1 = Analog Output (Alarm 1 disabled), Setpoint 1 = 300, Output 2 = Relay, Setpoint 2 = 200
Alarm 1 & 2 Setup: Deviation, Band, “ALR.H” = 10
Color Display Setup: “N.CLR” = Green, “1.CLR” = Amber, “2.CLR” = Red
Display Colors change sequences:
|
| RED |
|
| RED |
|
|
| RED |
|
| GREEN |
| RED |
| |||
•➤ |
|
|
| • | ➤ | |||||||||||||
|
|
|
|
|
| |||||||||||||
0 | 190 | 200 | 210 |
|
| 290 | 300 | 310 |
|
| ||||||||
|
|
| Alarm 1 is designed to monitor the Input Value around the Setpoint 1. | |||||||||||||||
|
|
| Alarm 2 is designed to monitor the Input Value around the Setpoint 2. | |||||||||||||||
|
|
| ||||||||||||||||
|
|
| Example 4: |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| Output 1 | = Relay, Setpoint 1 = 200 |
|
|
|
|
|
|
| |||||||
|
|
| Output 2 | = Relay, Setpoint 2 = 200 |
|
|
|
|
|
|
| |||||||
|
|
| Alarm 1 Setup: Deviation, Band, “ALR.H” = 20 |
|
|
|
| |||||||||||
|
|
| Alarm 2 Setup: Deviation, Hi/Low, “ALR.H” = 10, “ALR.L” = 5 |
| ||||||||||||||
|
|
| Color Display Setup: “N.CLR” = Green, “1.CLR” = Amber, “2.CLR” = Red | |||||||||||||||
Display colors change sequences: |
|
|
|
|
|
|
|
|
| |||||||||
• | RED |
| GREEN | • | • | AMBER |
| |||||||||||
• |
|
| ➤ | |||||||||||||||
0 |
|
| 180 |
| 195 | 200 | 210 |
| 220 |
|
| |||||||
|
|
| Reset: The Meter automatically resets after the last menu of the |
| ||||||||||||||
Configuration Mode has been entered. After the Meter resets, it advances to the Run Mode.
For complete Front Panel Pushbutton procedures, refer to the Supplemental Guide.
50
