Omega Vehicle Security 850i To Activate Auxiliary Output #2, To Activate Auxiliary Output #3

Models: 850i

1 26
Download 26 pages 18.73 Kb
Page 18
Image 18
To Activate Auxiliary Output #2:

To Activate Auxiliary Output #2:

Press & Hold for 3 Seconds the “Auxiliary #2 Output” Button ( II )

 

IF ARMED, THE SYSTEM

 

 

WILL DISARM, WITH

IF THE SYSTEM IS NOT ARMED,

 

 

3 SIREN CHIRPS

 

 

CONFIRMATION IS 1 SIREN CHIRP

 

Hold 3

AND 1 LIGHT

 

AND 1 LIGHT FLASH

TYPICALLY USED

FLASH

seconds

 

FOR OPTIONAL

 

 

 

 

 

 

 

 

TRUNK

 

 

 

RELEASE

 

Hold 3

 

 

 

seconds

THE DOORS WILL UNLOCK*

To Activate Auxiliary Output #3:

Press & Hold for 3 Seconds the “Auxiliary Output #3” Button ( III )

 

EXAMPLES:

CAN OPERATE OPTIONAL

CAN OPERATE OTHER

WINDOW ROLL-UPS

OPTIONAL EQUIPMENT,

 

ON OR OFF THE

Hold 3

VEHICLE

seconds

 

* An optional doorlock interface must be installed. When Auxiliary #2 is operated, all of the doors will unlock, even if the vehicle is configured with Driver’s Door Priority.

Auxiliary Output Notes:

Auxiliary #2 output may be activated anytime, provided the vehicle’s igni- tion is off. While the ignition is on, the Auxiliary #2 output can be operated as long as a vehicle door is open; this prevents the output from being acciden- tally activated while driving.

If feature #6 is programmed to have the Auxiliary #2 output disarm the sys- tem, the doors will unlock when it is activated; and there is an audible and visual confirmation: 3 siren chirps and one light flash if the system also dis- arms, and one chirp and light flash otherwise.

Auxiliary #3 output may be activated at any time, regardless of the ignition being on or off, and regardless of the security system’s status.

Auxiliary #3 has no audible and/or visual confirmation.

Feature #8

Doors Lock When Ignition Is Turned On

 

(Factory Default Setting On)

This feature configures the system to automatically lock the vehicle’s doors every time that the ignition switch is turned on. An exception to this would be if feature #11 is turned on, and a door being open when the ignition switch is turned on. The two following features, #9 and #10, control the automatic unlocking operation.

Programming Doors Lock When Ignition Is Turned On:

Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and released eight times. The system’s response will be eight siren chirps, and the Status Light flashing eight times, pausing, then repeating. Within 10 seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to turn on “Doors Lock When Ignition Turned On” (the siren will chirp once) or the "Disarm/Unlock" button to turn this feature off (the siren will chirp twice).

Feature #9

Unlock #1 When Ignition Is Turned Off

 

(Factory Default Setting On)

This feature configures the system to automatically unlock the vehicle’s doors every time that the ignition switch is turned off. An exception to this would be if feature #11 is turned on, and a door being open when the ignition switch is turned off. If the system is installed without the Driver’s Door Priority unlock interface, this feature unlocks all of the doors when the ignition switch is turned off. If Driver’s Door Priority is installed, this feature controls the driver’s door only, and the next feature will control the automatic unlocking of the other doors.

Programming Unlock #1 When Ignition Is Turned Off:

Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and released nine times. The system’s response will be nine siren chirps, and the Status Light flashing nine times, pausing, then repeating. Within 10 seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to turn on “Unlock #1 When Ignition Turned Off” (the siren will chirp once) or the "Disarm/ Unlock" button to turn this feature off (the siren will chirp twice).

Feature #10

Unlock #2 When Ignition Is Turned Off

 

(Factory Default Setting Off)

Explained in the previous feature, this feature controls the automatic unlock- ing of all doors except the driver’s door if Driver’s Door Priority is installed.

Programming Unlock #2 When Ignition Is Turned Off:

Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and released ten times. The system’s response will be ten siren chirps, and the

Page 16

Page 33

Page 18
Image 18
Omega Vehicle Security 850i To Activate Auxiliary Output #2, To Activate Auxiliary Output #3, Auxiliary Output Notes, Page