12.- INSTALLATION
1.- Prepare a panel
2.- Slide the instrument (1) into the
3.- Slide the two fixation pieces (3) with T shape by both lateral sides of the instrument, such as it is shown on the drawing below.
4.- Turn the screw bolt until it is pressed firmly against the panel (4) and the instrument (1) remains totally fixed.
5.- The front part of the instrument has the necessary elements to provide an IP 65 protection. If the panel where this instrument must be installed, it must to comply some protection standards against water splashes, then a rubber profile must be installed with a rectangular or round shape
(5) on the place indicated and shown on the drawing below.
5
1
4 3 2
13.- MECHANICAL DIMENSIONS mm (inches)
Aluminium back plate
C
PANEL |
|
| B |
E |
|
D |
|
Panel thickness : Max. 14 (0.55) | A |
Min. . (0.10) | |
|
|
2345678901234567890123456Dimensions in mm. Values in brackets are inches or pounds. Add 27 mm (1.1) to the dimension C for power connector.
DIMENSIONS | PANEL | WEIGHT POWER |
Digits | Height | A | B | C | D | E |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 57 (2.3) | 264 (10.4) | 120 (4.75) | 112 (4.41) | 256 (10.07) | 112 (4.4) | 2.3 Kg (5 lbs) | 6 | VA |
| 100 (4) | 480 (18.9) | 180 (7.09) | 112 (4.41) | 472 (18.58) | 172 (6.77) | 5 Kg (11 lbs) | 12 | VA |
Page : 11
