Omnitron Systems Technology 10/100M2 user manual Module Management Mode

4.2MODULE MANAGEMENT MODE

From the Module configuration screen, the management mode can be changed. Select option 18 to change the mode. The management mode options will be displayed.

PI

Module -	iConverter 10/100M2			iConverter, Serial Agent
Identifier -
Chassis Number		=	1	Switch ON Condition	OFF Condition		H/W	Actual
Slot Number		=	1	1: Pause Enabled	Pause Disabled		Off	Off
Model Number		=	8919N-0	2: Fiber HDX	Fiber FDX		Off	Off
				3: UTP Manual	UTP Auto-Neg		Off	Off
Serial Number		= xxxxxxxx		4: UTP 10 Mbps	UTP 100 Mbps		Off	Off
Manufacturing Date = xxxxxxxx				5: UTP HDX	UTP FDX		Off	Off
Product Revision		= x		6: Link Propagate	Link Segment		Off	Off
Software Revision		= xx		7: Remote Fault	Normal		Off	Off
				8: Symm Fault Det	Normal		Off	Off
LED				9: BP A Enabled	BP A Disabled		On	On
1: Power		= On		10: BP B Enabled	BP B Disabled		On	On
2: Power Supply 1		= Off		11: Not Available
3: Power Supply 2		= Off		12: Slave Only	Master/Slave		Off	Off
4: Power Supply 3		= Off		13: Not Available
5: Fiber Link		= Off		14: Not Available
6: BP Master		= On		15: Not Available
7: UTP 10	Link	= Off		16: Not Available
8: UTP 100 Link		= Off		OAM settings:
9: UTP FDX		= Off		17: IP Protocol State		On
				18: Management Mode		Secure OAM
Toggle Switch(1-16), (I)dentifier, (R)eset, (H)elp, (P)ortStat, Port(C)tl >
Mode (1=OAM Off, 2=Auto Secure OAM, 3=Auto ah OAM, 4=Secure OAM, 5=ah OAM): 3

The 10/100M2 module supports several management options. Option 18 configures how the module will communicate to its remote partner. ‘Auto Secure OAM’ (option 2) and ‘Secure OAM’ (option 4) uses Omnitron’s proprietary secure encrypted management channel. ‘Auto Secure OAM’ will force the remote partner to communicate using the Secure OAM protocol while ‘Secure OAM’ will only attempt to communicate with the remote partner over the secure protocol. The management channel can support IP or IP-less connectivity based on the configuration of the ‘IP Protocol State’, option 17. ‘Auto ah OAM’ (option 3) and ‘ah OAM’ (option 5)’ conforms to the IEEE 802.3ah specification. ‘Auto ah OAM’ will force the remote partner to communicate using the ah OAM protocol while ‘ah OAM’ will only attempt to communicate with the remote partner over the ah protocol. This option provides an industry standard method of fault detection and monitoring. The management channel supports both IP and IP-less connectivity based on the configuration, option 17 and 18.

NOTE: See NetOutlook User Manual for complete information on the management modes.

Page 26