To change the egress rate, select option 3 for the fiber port or option 7 for the UTP port. The egress rates are displayed. Select the desired egress rate.
PI
SA
Bandwidth Control - iConverter GX/TM2 | iConverter, Serial Agent | ||
Identifier - |
|
|
|
Chassis Number | = 1 |
|
|
Slot Number | = 12 |
|
|
Model Number | = | 1: 64 Kbps | 17: 30 Mbps |
|
| 2: 128 Kbps | 18: 40 Mbps |
Fiber | Controls | 3: 256 Kbps | 19: 50 Mbps |
4: 512 Kbps | 20: 60 Mbps | ||
1: Ingress CIR | 1,000,000 kbps | 5: 768 Kbps | 21: 70 Mbps |
2: Ingress CBS | 150 kB | 6: 1 Mbps | 22: 80 Mbps |
3: Egress rate | 600 Mbps | 7: 2 Mbps | 23: 90 Mbps |
4: Queueing | Fair Weight | 8: 3 Mbps | 24: 100 Mbps |
|
| 9: 4 Mbps | 25: 200 Mbps |
|
| 10: 5 Mbps | 26: 300 Mbps |
UTP | Controls | 11: 6 Mbps | 27: 400 Mbps |
12: 7 Mbps | 28: 500 Mbps | ||
5: Ingress CIR | 1,000,000 kbps | 13: 8 Mbps | 29: 600 Mbps |
6: Ingress CBS | 150 kB | 14: 9 Mbps | 30: 700 Mbps |
7: Egress rate | 600 Mbps | 15: 10 Mbps | 31: 800 Mbps |
8: Queueing | Fair Weight | 16: 20 Mbps | 32: 900 Mbps |
|
|
| 33: 1000 Mbps |
Select Fiber Egress Rate from menu above
4.2.3Layer 2 Control Protocol Filter
Layer 2 Control Protocol Filter provides the ability to forward, discard or tunnel L2CP frames based on the network requirements. Select ‘forward’, ‘discard’ or ‘tunnel’ for each of the ports .
The Layer 2 Control Protocol Filter is accessed by selecting option 9 from the Port configuration screen.
PI
L2CP Control - iConverter GX/TM2 |
| iConverter, Serial Agent | ||
Identifier - |
|
|
| |
Chassis Number = 1 | Slot Number = 1 | Model Number = | ||
1: Fiber L2CP Ingress Control | Forward | |||
2: UTP | L2CP Ingress Control | Forward | ||
3: BP A | L2CP Ingress Control | Forward | ||
4: BP B | L2CP Ingress Control | Forward |
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Page 30