“A” Data bus “B” Data bus
A A | A | A | A A | A | A | A | A | A | A | A | A | A | A | A | A | A | ||
B | B B B B B B B B B | B | B | B | B | B | B | B | B | B | ||||||||
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 11 12 13 14 15 16 17 18 19 | |||||||||
“A” Data bus “B” Data bus
B | A | A | B | B | A | A | B | B | A |
“A” Data bus
A B
Managed Power Chassis
1 | 2 | 3 | 4 | 5 |
1 | 2 | 3 | 4 | 5 |
A | B | iConverter™ |
by Omnitron Systems Technology, Inc. |
3.0INSTALLATION PROCEDURE
3.1OVERVIEW
The following steps outline the installation and configuration procedures for the GX/TM2. Refer to the specified sections for detailed instructions.
•Configuring
•Installing the Module and Connecting Cables (Section 3.3)
•Configuring the Module via Command Line Interface (Section 3.4)
•Verifying Operation (Section 3.5)
When the setup and configuration procedures are completed, the GX/TM2 has been configured with the basic setup requirement for standard operation. To configure the module with additional features, see Section 4.0, “Detailed Module Configuration”.
Page 5
