Omnitron Systems Technology GX/TM2 user manual Verifying Operation

3.5VERIFYING OPERATION

PI

SA

Once the module has been installed and configured, per Sections 3.2 - 3.4, verify the module is operational by viewing the status of the LED indicators. The table below provides a description for each LED indicator.

The Power LED indicates the module is receiving power from the chassis or power cord. The plug-in module has an LED indicator for each available power supply in the chassis (the 19-Module Chassis has three, the 5-Module Chassis has two).

The Fiber Optic “FO” LED indicates the fiber optic connection between the modules has been established. A blinking LED indicates the presence of data.

The UTP LEDs indicate the module has established a connection across its UTP port. A blinking LED indicates the presence of data. See both tables to determine the UTP connection speed.

Refer to Section 6.0, Troubleshooting Guide, for help in determining possible fault conditions.

PI

SA

PI

SA

LED Function	Color		Off State	On / Blinking State		On / Blinking State
"Legend"
Power "Pwr"	Green	No power		On: Module has power		On: Module has power
				On: Power available from
Power Supply	Green	Chassis Power		installed Power Supply # X.		Not available on standalone
Status # X		Supply not installed		Blinking: No power available
				from installed Power Supply # X
1000Mbps				On: Fiber Link		On: Fiber Link
Fiber Optics	Green	No Fiber Link
				Blinking: Fiber Data Activity		Blinking: Fiber Data Activity
"P1"
Chassis		Chassis in Slave		On: Chassis Master Mode
Management	Green			Blinking: Operating in OAM		Not available on standalone
Master/Slave		Mode		Mode
"Msr/Slv"
UTP port		Not linked at		On: UTP linked at 100Mbps		On: UTP linked at 100Mbps
100Mbps	Green
		100Mbps		Blinking: UTP Data Activity		Blinking: UTP Data Activity
"100"
UTP port		Not linked at		On: UTP linked at 1000Mbps		On: UTP linked at 1000Mbps
1000Mbps	Green
		1000Mbps		Blinking: UTP Data Activity		Blinking: UTP Data Activity
"1000"
UTP port	Green	Not linked at		On: UTP linked at 10Mbps		On: UTP linked at 10Mbps
10Mbps
"100" + "1000"		10Mbps		Blinking: UTP Data Activity		Blinking: UTP Data Activity
UTP port		Half-Duplex when		On: Full-Duplex when any UTP		On: Full-Duplex when any UTP link
Full-Duplex	Green	any UTP link is
				link is active		is active
"FDX"		active
			LED Legend/State		UTP Link Speed
			"1000"	"100"
			OFF	OFF	UTP Not Linked
			OFF	ON	UTP Linked at 100Mbps
			ON	OFF	UTP Linked at 1000Mbps
			ON	ON	UTP Linked at 10Mbps

Page 23