Omron DDAA1000/SRM manual FCC Notification, Product User Guide

Product User Guide

FCC Notification

This device complies with part 15 of the FCC rules. Operation is subject to the following conditions:

1)This device may not cause harmful interference and

2)This device must accept any interference received, including interference that may cause undesired operation.

The device must be operated as supplied by Data-Linc Group. Any changes or modifications made to the device without the express written approval of Data-Linc Group may void the user’s authority to operate the device.

Caution: This device has a maximum transmitted output power of 955 mW. It is required that the transmit antenna be kept at least 23 cm away from nearby persons to satisfy FCC RF exposure requirements.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a industrial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

ƒReorient or relocate the receiving antenna.

ƒIncrease the separation between the equipment and receiver.

ƒConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.

ƒConsult the dealer or an experienced radio/TV technician for help.

Note: Whenever any Data-Linc Group SRM series modem is placed inside an enclosure a label must be placed on the outside of that enclosure which includes the modem’s FCC ID.

The following antennas are approved for use with Data-Linc Group’s 900MHz series modems.

NOTE: Per FCC Rules, the maximum power allowed at the antenna is 4 Watts E.I.R.P.

900MHz Directional Antenna

	Gain	Manufacturer	Manufacture Model Number	Data-Linc Model Number
	8.2 dBi	Larsen	YA6900W	A-YB
	11 dBi	Larsen	YA5900W	A-YHB
900MHz Omni-Directional Antenna
	Gain	Manufacturer	Manufacture Model Number	Data-Linc Model Number
	5.2 dBi	Maxrad	MAX9053	A-OB
	7.2 dBi	Maxrad	MAX9075	A-O5B
	0 dBi	Ying Hao	YH920801/AD-725-A-1	A-06/ADJ
	0 dBi	Centurion	EXC-902-BN	A-06BH-3S / 10S (**)

(**) This part number refers to an antenna kit(s). The 0 dBi refers to the antenna portion of the kit.

Note: The antenna used for this device must be professionally installed on a fixed-mounted permanent outdoor structure for satisfying RF exposure requirements, including antenna co-location requirements of 1.1307(b)(3).

DATA-LINC GROUP

PN 161-09981-002C