3. Using the Device
3.3Taking a Measurement
Notes:
•To cancel a measurement, press the START/STOP button to release the air in the arm cuff.
•Remain still while taking a measurement.
The monitor is designed to take measurements and store the measurement values in the memory for 2 people using USER ID 1 and USER ID 2.
1. Select your USER ID (1 or 2).
2. Press the START/STOP button.
The arm cuff starts to inflate automatically.
START 
INFLATE 
DEFLATE 
COMPLETE
If your systolic pressure is more than 210 mmHg
After the arm cuff starts to inflate, press and hold the START/STOP button until the monitor inflates 30 to 40 mmHg higher than your expected systolic pressure.
Cuff Wrap Guide Lamp | Notes: |
|
• The monitor will not inflate above 299 mmHg.
• Do not apply more pressure than necessary.
EN
11
