4.How to Modify the Settings
4.2Setting the Position Sensor Alarm
1.Press the SET button until the posi-
tion sensor alarm display ( 
) appears on the display.
The default settings is “On1”, and this emits a series of two short blips if your wrist is too far away from the measuring position, and beeps slowly when you wrist is in the cor-
rect position. When “On2” is selected
the alarm only beeps when your wrist is in the correct position.
2. Press the MEM button to select “on1”, “on2”, or “OFF”.
4.3Turning Right Wrist Measurement On/Off
1. Press the SET button until the right wrist measurement display ( 
) appears on the display. Select “On” to measure your blood pressure using your right wrist.
2. Press the MEM button to select “On” or “Off”.
20
