Advanced Positioning Sensor (APS) Setting
Set the (APS) function to ON or OFF and set SIGNAL of the position sensor to ON (beeps) or OFF (does not beep).
1.Push the SET button while the power is turned off.
Keep pressing the SET button until the Position Sensor Screen is displayed.
2.Select ON or OFF.
•The Position Sensor is set to ON and the SIGNAL is set to ON (to beep) at the time of your purchase of the monitor.
For setting the Position Sensor to OFF
Push the button to set the Position Sensor to OFF.
Position Sensor Screen
Position Sensor OFF Screen
• To set it to ON after setting it OFF, push the button.
• There is no SIGNAL setting when the Position Sensor is set to OFF.
Position Sensor ON
and SIGNAL ON Screen
How to set the SIGNAL to OFF when the Position Sensor is set to ON
Push the SET button to make
SIGNAL ON flash.
To set the monitor to SIGNAL OFF, push the button.
3.Lock the setting.
Position Sensor ON and SIGNAL OFF Screen
If you are also going to change other settings, push the SET button to lock the setting.
•When you push the SET button, the display changes to Measurement Screen.
If you want to finish after locking the setting, push the START/STOP button to turn off the power.
10
