Omron Healthcare HEM-637 manual 9

Automatic Memory Setting

The monitor stores the measured values and the date and time of measurement, which is helpful for the continuous blood pressure management.

However, if more than one person is expected to use this monitor, the measured values of more than one person will be stored. In that case, setting the Automatic Memory to OFF is recommended.

1.Push the SET button while the power is turned off.

Automatic Memory Screen is displayed.

Automatic Memory Screen

2.

3.

Select ON or OFF.

•The monitor is set to ON (to store) at time of your purchase.

To set it to OFF, push the button.

• If you want to set to ON after setting it to OFF, push the button.

Automatic Memory OFF Screen

Lock the setting.

If you are going to change other settings, push the SET button to lock the setting.

•When you push the SET button, the display changes to the Position Sensor Screen.

If you want to finish operation after locking the setting, push the START/STOP button to turn off the power.

9