How to Measure Blood Pressure
(This measurement example describes the situation where the Position Sensor is set to ON and the SIGNAL is set to ON.)
1. Push the START/STOP button.
The Position Sensor Screen is displayed.
• If the date and time |
|
is not set, the Time |
|
Screen is displayed. |
|
Be sure to set the date |
|
and time before using |
|
this monitor | Time Screen |
|
Hold your elbow firmly to avoid body movement.
Remain still and do not talk during measurement.
2.Adjust the height of your wrist by using your
elbow as the axis so that the mark can be aligned with the mark.
The wrist movement is indicated with the mark. Slowly move your wrist up and down so that the wrist comes to the level of your heart ( mark).
Please be careful not to raise your wrist too high.
If your wrist is raised higher than the level of your heart, the monitor will let it know with the display of a mark.
Slowly lower your wrist so that the mark aligns with the level of your heart ( mark) using your elbow as the axis.
When the wrist reaches the proper position, the monitor beeps and automatically starts inflation and measurement.
19
