Factory default
You can reset all settings back to the
factory default settings. An activated
External Dos and its respective amount
of detergent or dosage concentration
will not be reset.
^Select Reset and press the center
button to confirm.
Select last program
You can chose whether to preset the
Normal program or the last selected
program.
^Select the desired setting and press
the center button to confirm.
Temp. display
During a program the current
temperature is displayed as factory
default setting.
If the temperature display is turned off
the remaining run time is being
displayed during a program.
^Select the desired setting and press
the centre button to confirm.
To close the Settings menu
You can close the Settings menu with
Finish.
^Select Finish and press the center
button to confirm.
The last selected program is displayed
briefly and the respective indicator light
comes on.
After a short while, the estimated
program runtime is displayed.
Settings
55