Compaction Mode | Description | Encoding Capability |
|
|
|
‘0’ (Future Use) | Byte Compaction Mode (BC) | All characters, |
‘1’ (Recommended) | Text Compaction Mode (TC) | ASCII only, |
|
|
|
‘2’ (Future Use) | Numeric Compaction Mode (NC) | Digits Only, |
A’ (Future Use) | AUTO (combinations of all modes) | Mix of three compaction modes |
|
|
|
SL: | Security Level byte. This can be any digit from ‘0’ to ‘8’. Set the value of the Security Level based on | ||||
| the number of user’s data to be encoded |
|
| ||
|
|
|
|
|
|
|
| Security Level |
| # |
|
|
|
|
|
|
|
|
| ‘0’ |
| 2 |
|
|
| ‘1’ |
| 4 |
|
|
| ‘2’ (recommended) |
| 8 |
|
|
| ‘3’ |
| 16 |
|
|
| ‘4’ |
| 32 |
|
|
| ‘5’ |
| 64 |
|
|
| ‘6’ |
| 128 |
|
|
| ‘7’ |
| 256 |
|
|
| ‘8’ |
| 512 |
|
SW: Symbol Width byte. This is the total width length of the printed PDF417 symbol. The user may specify any value here, and the printer will calculate the actual width of the symbol & it will update this value again (Future Use). Recommended Value: ‘0’ or 0x30
SH: Symbol Height byte. This is the total height length of the printed PDF417 symbol. The user may specify any value here, and the printer will calculate the actual width of the symbol & it will update this value again (Future Use). Recommended Value: ‘0’ or 0x30
EW: Element Width byte. This is the width length of a single element in the PDF417 symbol, that is, bar/space width. Can be set to ‘1’ or ‘2’
Element Width Value | Length in mil |
‘1’ | 4.9 mil |
‘2’ (recommended) | 9.8 mil |
EH: Element Height byte. This is the height length of a single element in the PDf417 symbol, that is, bar/space height. A value between 0x03 to 0x0A can be used. Recommended Value: 0x06
MSB: Most Significant Byte: This byte represents the most significant byte of how many bytes to encode of User’s Data. Maximum is 06 in hex, that is, MSB = 06h (max).
LSB: Least Significant Byte: This byte represents the least significant byte of how many bytes to encode of user’s Data.
User’s data: Data to be encoded in the barcode
Total number of user’s data that can be encode is [MSB][LSB] = 0x06B8 = 1720 bytes, that is, only alphanumeric with security level set to its minimum value.
Setting the security level to a higher value, will result in less user data to be encoded, since the total number of code words that can fit in a PDF417 symbol are 929, and if security level is set to ‘8’, then already 512 error code words are occupied in the symbol, and
If any parameter in the command line does not match the spec in this document, then an error message “Invalid Barcode” will be sent out from the printer’s serial port.
23
