Datamax 7A300007 Rev. 2 manual Select Load Operating Mode ESC F M m CR, Flash

Select Load Operating Mode ESC F M m CR

This command selects the load operating mode. Possible values for parameter m are ‘0’: Standard response or ‘1’ : Response with diagnostics message (default).

Command	Command	Printer Response	Printer Response	LED Status
String	Description	m =1	m =0
				Communication LED – Flashing Green
Esc-‘D’-‘F’	Enable font	?	?
	downloading			MCR/Printer Error LED –Steady Red
				Communication LED – Flashing Green
Esc-‘F’-‘I’	Display tables	Display installed	‘1’: if command correct
	Information	Font tables info	‘0’: otherwise	MCR/Printer Error LED –Steady Red
		(refer to Table 5)
				Communication LED – Flashing Green
Esc-‘F’-‘S’-	Display font	Esc-‘F’-‘S’ m t k f	‘1’: if command correct
<CR> or <LF>	download current		‘0’: otherwise	MCR/Printer Error LED –Steady Red
	Settings
				Communication LED – Flashing Green
Esc-‘F’-‘P’ – m -	Set Font	Esc-‘F’-‘S’ m t k f	‘1’: if command correct
t - k - f - <CR>	Download		‘0’: otherwise	MCR/Printer Error LED –Steady Red
or <LF>	Parameter
				Communication LED – Flashing Green
Esc-‘F’-‘M’- m -	To select Mode	Esc-‘F’-‘S’ m t k f	‘1’: if command correct
<CR> or <LF>			‘0’: otherwise	MCR/Printer Error LED –Steady Red
				Communication LED -	Flashing green
Esc-‘F’-‘K’- k -	To select font	Esc-‘F’-‘S’-m t k f	‘1’: if command correct
<CR> or <LF>	column(K) value		‘0’: otherwise
				Communication LED -	Flashing green
Esc-‘F’-‘F’- f -	To select font	Esc-‘F’-‘S’ m t k f	‘1’: if command correct
<CR> or <LF>	row(F) value		‘0’: otherwise
				Communication LED -	Flashing green
Esc-‘F’-‘L’ – t -	Select file type	Esc-‘F’-‘S’ m t k f	‘1’: if command correct
<CR> or <LF>	**and start of font		‘0’: otherwise
	download
				While File is transferring:
Send the .bdf file		Send the File
				Communication LED - Flashing Green
				When transfer is complete:
				Communication LED - Flashing Green
				Total number of characters transferred is
				displayed
				While the font is being burned in
		On burn process	On burn process
Esc-‘F’- ‘B’	To program or	Complete:	Complete:	FLASH
<CR> or <LF>	burn font on flash	D!X	D!X	Communication LED – Flashing Green
				MCR/Printer Error LED - Flashing Red
				When Burning complete
				Communication LED – Steady Green

46