Electrical connection

￿All electrical work must be performed by a qualified service technician in accordance with local and national safety regulations.

The electrical connection is made through a plug and outlet according to national requirements. The outlet has to be easily accessible after installation. This facilitates access for electrical safety checks, for example when the appliance is being repaired or serviced.

If the appliance is hard wired, a multiple-pole circuit breaker must be installed. The contact opening at the main breaker must be at least 3 mm wide and lockable in the open position.

If necessary, an equalization of the potentials must be carried out.

A damaged power cord must only be replaced with a genuine Miele cord by a Miele service technician..

For technical data, see the data plate or the attached wiring diagram.

The appliance must only be operated with the voltage, frequency and fuse rating shown on the data plate.

A conversion may only be performed according to the attached conversion diagram and wiring diagram.

Subsequent conversions may result in longer program runtimes and higher energy consumption.

The specified label values are only met with the factory settings.

The data plates are at the back of the appliance and along the right edge of the open door.

The wiring diagram comes with the appliance.

The conversion diagram is attached to the base panel behind the plastic base cover.

Removing the base cover

The electrical terminal is located behind the front cover in the middle of the dishwasher base.

￿Disconnect the dishwasher from the electrical power supply.

￿Unscrew the 2 screws (left and right) and remove the base panel.

￿Screw the base panel back on when work on the connection is finished.

Follow the installation diagram included with the dishwasher!

Grounding connection

The ground lead must be connected to the screw connection point (marked with the ground symbol ￿) at the back of the machine.

WARNING

THIS APPLIANCE MUST

BE GROUNDED

74

Page 74
Image 74
Miele PG 8083 SCVI manual Electrical connection, Grounding connection, Removing the base cover

PG 8083 SCVI specifications

The Miele PG 8083 SCVI is a top-tier commercial dishwasher designed to meet the demanding needs of professional kitchens while ensuring optimal efficiency and cleanliness. This model epitomizes Miele’s commitment to quality and innovation, making it a preferred choice among chefs and restaurant owners.

One of the standout features of the PG 8083 SCVI is its advanced washing technology. The unit employs Miele's innovative Freshwater system, which utilizes clean water for every wash cycle. This not only enhances hygiene by preventing the reuse of dirty water but also results in superior cleaning results. This machine is capable of adapting its wash cycle based on the level of soiling, ensuring that dishes emerge spotless and sanitized every time.

The PG 8083 SCVI has a robust design that allows it to handle a heavy workload, with a maximum capacity of up to 3000 dishes per hour, making it optimal for busy environments. Its efficiency is complemented by short cycle times, which range from just 17 minutes for standard washing. This means that restaurant operations can continue smoothly without unnecessary downtime, a critical factor in fast-paced settings.

Energy efficiency is another key characteristic of the PG 8083 SCVI. It features intelligent sensors that optimize water and energy consumption according to the load size, therefore reducing operational costs. Furthermore, this model is built with insulation to minimize heat loss, contributing to its overall energy-efficient design.

The dishwasher also boasts user-friendly controls via a sophisticated display that guides operators through each cycle, making it suitable for staff of various skill levels. For added convenience, the unit can be connected to a water softening system to prevent limescale buildup, prolonging its lifespan and maintaining performance.

In addition to practicality, Miele emphasizes design. The PG 8083 SCVI has a sleek exterior that can seamlessly fit into any kitchen aesthetic. Its compact design allows for efficient use of space, an important consideration in many professional kitchens.

In summary, the Miele PG 8083 SCVI offers a blend of cutting-edge technology, efficiency, and durability, making it an exceptional choice for anyone in the foodservice industry looking to elevate their cleaning process while maintaining high standards of hygiene and performance.