Limit Management Station
Click to enable this function.
Section 1 MAC | Enter the first management station’s network adapter MAC addresss. |
Address |
|
Section 2 MAC | Enter the second management station’s network adapter MAC address. If |
Address | you are only setting up one management station, leave Station 2 MAC |
| address with all F’s. |
Block Internet |
|
Request | Click to enable this function. |
Management via | This field will be automatically disabled when Block Internet Request is |
Internet | checked. If Block Internet Request is not enabled, you can choose to |
| enable/disable this function. |
Below are the results of checking or not checking the Block Internet Request and HTTP management for this device. (V: Checked and O: Unchecked)
Block Internet | Management Via | Result | |||
Request |
| Internet |
|
|
|
V | O (automatically) | WAN requests over TCP 113 (IDENT) and ICMP are | |||
|
|
| rejected. | ||
|
|
| HTTP management is not allowed. | ||
O |
| V | WAN requests over TCP 113 (IDENT) and ICMP are | ||
|
|
| accepted. | ||
|
|
| HTTP management is allowed. | ||
O |
| O | WAN requests over TCP 113 (IDENT) and ICMP are | ||
|
|
| accepted. | ||
|
|
| HTTP managements is not allowed. | ||
|
|
|
|
|
|
Modify the configuration port | Enable |
| Check to modify web configuration port number settings. | ||
|
|
| |||
Web Configuration port |
|
|
| Input the port number for web configuration. The default | |
|
|
|
| web port for configuration is set to 80. If you want to set | |
|
|
|
| the port to another port, input that port number and click | |
|
|
|
| SAVE. | Once the web configuration port is modifiied, |
|
|
|
| configuation over web should be checked with the new | |
|
|
|
| setting; e.g. if the web configuration port was set to | |
|
|
|
| 8080, to login the web configuration, you need to input | |
|
|
|
| the address like: http://192.168.1.254:8080 (where | |
|
|
|
| 192.168.1.254 is your local port IP address.) | |
Enable |
| Check to modify the standard FTP port number. | |||
|
|
| |||
FTP Port Number |
|
|
| Enter the new FTP port number (default is 21). |
SAVE
UNDO
After changing the setting(s), click SAVE to save the setting(s)
Click UNDO to clear all the settings on this page.
Innovations in Home Living.
301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
Middletown, PA 17057 | www.onqhome.com |
15