On-Q/Legrand 364732-01 Click on, Device will save, Internet Port to refresh the screen, Web sites

PPPoE Information

PPPoE Account		Active Profile ~1 ~2 ~3 You can set up to
		three PPPoE accounts, while only one account can
		be enabled at a time. To set the profile, select the
		profile number, enter all the information, and then
		click on	Save.	The device will save the
		information, restart and return to the previous
		menu page. If you don’t see the saved information
		on the screen, from the menu on the left, click on
		the “Internet Port” to refresh the screen.
Username		Maximum input is 52 alphanumeric characters
		(case sensitive)
Password		Maximum input is 36 alphanumeric characters
		(case sensitive)
Service Name		For identification purpose. If it is required, your
		ISP will provide you with the information.
Max packet size (MTU)		Max packet size (MTU): Click the down arrow
		to select the most appropriate MTU (maximum
		transfer unit, segment size; default value is 1452)
		for your application. Reducing the packet size can
		help connecting to certain web sites or speeding
		up packet transfer rate. If the incorrect selection
		is selected, you may not be able to open certain
		web sites.
Static IP Address:		Enter the IP address provided by your ISP.
Static DNS Server		Enter the primary and secondary DNS addresses
		provided by your ISP.
Auto-disconnect if idle for	minutes	Configure this device to disconnect the PPPoE
		connection when there is no activity for a
		predetermined period of time.
		• Default: 5 minutes. You can input any number
		from 0 to 65535.
		• To keep the line always connected, set the
		number to 0.
Auto-reconnect		Check to enable auto-reconnected with PPPoE
		line. This function allows the device to
		automatically reconnect when the line is
		disconnected due to ISP problem.

Innovations in Home Living.

301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.

Middletown, PA 17057 www.onqhome.com

(800)-321-2343

9