One for All URC-6131 manual Programming Device Control

OFA 6 PVR 2/15/03 9:25 AM Page 10

PROGRAMMING DEVICE CONTROL (continued)

6.Repeat steps 1 through 5 (on the previous page) for each device you want to control. For future reference,write down each working device code in the following boxes:

TV Code:

PVR Code:

DVD Code:

CBL/SAT Code:

AUD Code:

VCR Code:

PROGRAMMING DVD PLAYER/VCR COMBO CONTROL

1.Turn on the DVD Player/VCR Combo and insert a DVD.

NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control, press DVD. Next, press and hold SET until the LED (red light) blinks twice, then release SET.

3.Use the Setup Codes For DVD Player/VCR Combos (on page 21) to locate the brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.

4. Aim the remote control at the device and press POWER once. It should turn off. If it does not, repeat steps 2 through 4, trying each code for your brand until you find one that works. If it still does not work, try Searching For Your Code on the next page.

NOTE: If the device does not have a POWER key, press the (Play) key.

10