Advanced Features

Sleeptimer

Sleeptimer is a feature which comes built into many TVs and Satellites. It allows you to set your device to turn off within a certain amount of time. This feature comes in handy if, for example, you enjoy falling asleep with your television on.

With the ONE FOR ALL, there are two ways to use the sleeptimer. If your TV or Satellite came with this feature built in, follow the instructions “Device Sleeptimer” below. If your device did not come with this feature, follow the instructions “ONE FOR ALL Sleeptimer”

Device Sleeptimer

If your TV or Satellite has a “Sleeptimer” function built in, you can access this function with your ONE FOR ALL remote. To do so:

1

Make sure your TV (or Satellite) is switched on.

2

3

or

Press the device key (TV or SAT).

Point the ONE FOR ALL at your TV (or Satellite) and press and release MAGIC then press POWER. You should see the Sleeptimer activate on your TV screen. To increase the timer, simply press POWER again (within 5 seconds) until the timer gets to the desired time.

To deactivate the Sleeptimer, repeat steps 1-3 above. During step 3, continue pressing Power until the timer indicates zero minutes.

Important note: Remember, your device must have its own Sleeptimer function in order for the above instructions to operate. If your device does not have its own Sleeptimer, follow the instructions outlined on the next page.

25

Page 27
Image 27
One for All URC-7540 manual Device Sleeptimer