Installation
After you have used the Search Method, you can find out which code the ONE FOR ALL responded to by blinking back the code. It is handy to know your Television, Video, Satellite Receiver or Cable Box code for future reference. Remember, you can only blink back your code after the ONE FOR ALL is operating your device.
To blink out your Television code:
1
2
3
4
5
6
Press TV. Press and hold MAGIC until the ONE FOR ALL 4’s red light blinks twice.
Press 9 9 0. The red light will blink twice.
For the first digit of your
If there are no blinks, the digit is "0".
For the second digit, press 2 and count the red blinks.
For the third digit, press 3 and count the red blinks.
For the fourth digit, press 4 and count the red blinks. Now you have your four- digit code.
Make sure you write your Television code in the boxes provided in the battery compartment and on page 10 for easy future reference.
Important note: To blink back the code for your Video, Satellite or Cable Box, follow the instructions above only press VCR or SAT during step 1.
9
