One for All URC-7540 manual Press device key, Aim remote at your device and press or Play

_ _ _ _

Quick Set-Up

The instructions below and on the next page can be used to quickly install your new ONE FOR ALL.

You can use the Quick Set-Up below with the codes listed on pages 11-21. If this doesn’t work, try the Quick Search on the next page. The Quick Search can also be used even if your brand is not listed at all.

1. Press device key:

or or or

2. Press and hold until the red light blinks twice. Then release.

3. Enter (4-digit code). See pages 11-21. The red light will blink twice.

4. Aim remote at your device and press (or PLAY).

NOTES:

-Make sure your device is switched on.

-The instructions above are a ÒQuickÓ set-up guide. For further explanation, please refer to the pages within.

-Make sure you write your Set-Up codes in the boxes provided inside the battery compartment for easy future reference.

2