Advanced Features
Learning
The ONE FOR ALL 6 comes with a complete library of preprogrammed codes. After you have set up the ONE FOR ALL 6 for your device, you may find that there are one or more keys which you had on your original remote which do not have a place on the ONE FOR ALL keypad.
As a convenience, the ONE FOR ALL 6 offers a special Learning feature that allows you to copy any function from your original remote control onto the keypad of the ONE FOR ALL 6.
To use the Learning feature, please follow the instructions below. Please note, the "custom keys"
Before you start:
-Make sure your original remote control is working correctly.
-Make sure neither your ONE FOR ALL nor your original remote controls are pointing at your device.
1Place both remote controls (the ONE FOR ALL 6 and your original) on a flat surface. Make sure the ends which you normally point at your device are facing each other. Keep the remotes at a distance of 2 to 5 cm.
2Press and hold the MAGIC key until the device key blinks twice (the device key blinks once then twice).
3
4
5
Press 975 (the device key will blink twice).
Press the device key (on the ONE FOR ALL remote)
to select the mode to which you want to copy the learned function.
Press the key (on the ONE FOR ALL remote) where you want to place the learned function (the device key will flash rapidly).
6Press and hold the key (on your original remote) that you want to copy until the device key on the ONE FOR ALL blinks twice.
7If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning. If you would like to continue learning but in a different mode (with another original remote), repeat steps
8To exit the learning mode, press and hold MAGIC until the device key blinks twice.
9Learning is mode specific. To access your learned function, press the appropriate device key first.
30 | WWW.ONEFORALL.COM |
