One for All URC-7560 manual Quick Set-Up

_ _ _ _

Quick Set-Up

The instructions below and on the next page can be used to quickly install your new ONE FOR ALL.

You can use the Quick Set-Up below with the codes listed on pages 11-21. If this doesn’t work, try the Quick Search on the next page. The Quick Search can also be used even if your brand is not listed at all.

Make sure you install the batteries in your ONE FOR ALL before following the instructions below.

Make sure your device is switched on (not in standby).

1. Press device key: TV or VCR or SAT CD or AUD or DVD

2. Press and hold until the device key blinks twice (the device key will blink once and then twice). Then release.

3. Enter (4-digit code). See pages 11-21. The device key will blink twice.

4. Aim remote at your device and press (or PLAY).

NOTES:

-The instructions above are a ÒQuickÓ set-up guide. For further explanation, please refer to the pages within.

-Make sure you write your Set-Up codes in the boxes provided on page 11 and inside the battery compartment for easy future reference.

2