One for All URC-7562 Advanced Features, Colour and Brightness, Volume Punch-Through, Auto Scan

Models: URC-7562

1 40
Download 40 pages 33.11 Kb
Page 9
Image 9

Advanced Features

Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR ALL may operate the colour and brightness settings of your television.

Colour (+)

= Press and release MAGIC

then hold Volume (+)

Colour (-)

= Press and release MAGIC

then hold Volume (-)

Brightness (+) = Press and release MAGIC

then hold Channel (+)

Brightness (-)

= Press and release MAGIC

then hold Channel (-)

Note: You have 5 seconds to press the Volume or Channel keys for colour or brightness adjustment after pressing MAGIC.

Volume Punch-Through

You may be able to use some features of your Television, Video Recorder and Satellite Receiver at the same time. If you're watching a programme on your Video, you can adjust the volume (a TV function) without first pres- sing the TV key. The chart below lists some of the possibilities:

Last Key Pressed:

You Can Control:

 

 

VCR

TV volume up and down, mute

SAT

TV volume up and down, mute

 

 

To punch through to TV Volume while in VCR, SAT or DVD mode press: MAGIC* 9 9 3 TV key.

To punch through to AMP/TUN Volume while in CD mode press: MAGIC* 9 9 3 AUD key.

To cancel the ”Volume Punch Through” press:

MAGIC* 9 9 3 Volume(+) (a device key will blink four times).

*Here you must hold down MAGIC until the device key blinks twice.

Auto Scan

Your ONE FOR ALL 6 comes with a special Auto Scan function which lets you “scan” through every programme available on your device.

For example, to scan the programmes on your TV:

1Aim the ONE FOR ALL 6 at your TV. Press the TV key. Press and relea- se MAGIC then press the MUTE key.

The ONE FOR ALL 6 will send the command to advance through all the programmes available on your Television stopping at each pro- gramme for about three seconds. Remember, you must aim the ONE FOR ALL at your device the entire time you are using Auto scan.

2When you find a programme you would like to watch, simply press any key on the ONE FOR ALL key pad to stop the Auto Scan feature.

Important note: Auto Scan may not work with devices that did not have programme +/- keys on the original remote control.

WWW.ONEFORALL.COM

9

Page 9
Image 9
One for All URC-7562 manual Advanced Features, Colour and Brightness, Volume Punch-Through, Auto Scan