Setting up the Home Theater key
Example: To set up the key pad like this
Key Group | To be controlled by |
Group 1 | DVD |
Group 2 | AUD |
Group 3 | TV |
Group 4 | TV |
Group 5 | VCR |
1Press HOME THEATER.
2Press and hold MAGIC until a device key blinks twice (the device key will blink once then twice).
3Press 9 7 9.
4Press the Play key (Group 1 will be selected).
5Press the DVD key (the DVD key blinks twice).
6Press the Volume (+) key (Group 2 will be selected).
7Press the AUD key (the AUD key blinks twice).
8Press the Channel (+) key (Group 3 will be selected).
9Press the TV key (the TV key blinks twice).
10Press the number 1 key (Group 4 will be selected).
11Press the TV key (the TV key blinks twice).
12Press the Menu key (Group 5 will be selected).
13Press the VCR key (the VCR key blinks four times). You will automa- tically exit the HOME THEATER programming mode.
Now, whenever you press the HOME THEATER key:
The Play keys (Group 1) will control your DVD player.
The Volume keys (Group 2) will control your amplifier.
The Channel keys (Group 3) will control your TV.
The Number keys (Group 4) will control your TV also.
The Menu keys (Group 5) will control your Videorecorder.
If you do not complete a group entry within 10 seconds, the programming will not be stored. You can exit the HOME THEATER programming mode after completing a Group assignment by pressing MAGIC (the device key blinks twice). Your ONE FOR ALL 6 will store the changes entered up to that point.
16 | WWW.ONEFORALL.COM |
