One for All URC-7562 manual Installing the Batteries, Keypad

Installing the Batteries

Your ONE FOR ALL 6 needs 2 new “AA/LR6” alkaline batteries.

1Remove the battery cover from the back of your ONE FOR ALL 6 by pressing down on the tab.

2Match the batteries to the + and - marks inside the battery case, then insert the batteries.

3Press the battery cover back into place.

Important notes:

-On the inside of the battery compartment door you will find a label on which to write your Set-Up codes after your ONE FOR ALL 6 is set up for your device. Please write down your codes for easy, future reference.

-Do not use rechargable batteries.

-Upon changing the batteries, your set-up codes and advanced programming will be retained.

The Keypad

See picture of ONE FOR ALL 6 remote on page 3.

1MAGIC Key

The MAGIC key is used to set up your ONE FOR ALL 6 and to access special functions.

2MENU Key

The MENU key controls the same function as it did on your original remote. If available on your original remote control, this key will also allow you to access the Surround mode of your device.

3POWER Key

4

5

6

The POWER key controls the same function as it did on your original remote.

HOME THEATER Key

This key is used to select the Home Theater mode of the ONE FOR ALL remote control. See page 15 for more information.

Backlit Device Keys

The TV, VCR, SAT, CD, AUD and DVD keys select the home entertain- ment device to be controlled. For example pressing the TV key allows the remote to control the functions of your Television, after pressing VCR you can operate your Video Cassette Recorder, etc. For more detailed information, please refer to the chart on page 6. During operation of the ONE FOR ALL the device key will light up to indicate the mode you are using.

Number Keys

The Number keys (0-9, 10, 20 (AV)) provide functions just like your original remote. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key, which is the same as the 10 key. If your original remote has a 20 key this function can be found under the AV key.

7AV

The AV key operates the same function it did on your original remo- te control. Also, if your original remote control required that you press an “EXIT” key during Menu operation, the AV key can be used for this function. In VCR mode it obtains the TV/VCR function.

8Directional Keys

If available on your original remote, these keys will allow you to navigate through the menu and the Surround Sound mode of your device.

WWW.ONEFORALL.COM 4