C H A P T E R

GETTING STARTED

2.1.Installation

The F3400/F1000 comes in a 19 inch (.48m) rack mount enclosure. Install the F3400/F1000 in the rack. Use the proper anchoring method to mount the unit securely. Supply the 24VDC to the unit.

2.2.Communication

The F3400/F1000 will not communicate over a user’s network the first time it is connected to the network. The manufacturer programs the F3400/F1000 with a default IP address: 10.0.0.186, subnet: 255.255.255.0. This default address must be changed to an IP address that corresponds with the user's network before the F3400/F1000 can communicate over the network.

2.3.Set the F3400/F1000’s IP Address

There are four ways to set the F3400/F1000’s IP address: Via the ARP and PING commands

Via the Web browser

Via the EIA232 interface Via Telnet commands

www.rletech.com

19

970.484.6510

Page 19
Image 19
Falcon manual Getting Started, Installation, Communication, Set the F3400/F1000’s IP Address