CONNECTIONS
HDMI Output Mode and Actual Output SignalsPress [RESOLUTION] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution changes as follows every time [RESOLUTION] is pressed.
Front Panel |
|
|
|
|
| * | * | |
Display |
|
|
|
|
| |||
► | ► | ► | ► | ► |
| ► | ||
HDMI Video | 1080 | |||||||
480 | 480 | 720 | 1080 | 1080 | Progressive | Source Direct | ||
Resolution | Interlaced | Progressive | Progressive | Interlaced | Progressive | |||
24 frame |
| |||||||
|
|
|
|
|
|
|
*Even if “HDMI Video Resolution” is set to “Source Direct”, HDMI video resolution will be changed when your TV is not compatible with the video resolution of a disc material.
Copyright protection system
To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both the unit and the TV (or an AV receiver) support a copyright protection system called HDCP
Note
•When using
•The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected.
•Among the devices that support HDMI, some do not support audio output (e.g. projectors). In connections with device such as this unit, audio signals are not output from HDMI OUT jack.
•Video and audio signals may be distorted temporarily when switching to/from the HDMI output mode.
•You can change the HDMI output mode with [RESOLUTION] during playback as well. (This is not available during BD/ AVCHD playback.)
•You can also change the HDMI output mode from “HDMI Video Resolution” setting in “Video” menu. In this menu, you can confirm what HDMI video resolutions are supported by connected TV. Refer to page 43.
•In order to get natural and high quality film reproduction of
•If the disc contains 1080p24 frame material,
•For AVCHD,
•When “HDMI Video Resolution” is set to “1080p”, “1080p24” or “Source Direct”, the “Component Output” will be set to “480i” automatically.
•If the video is not properly from HDMI OUT jack after you set the “HDMI Video Resolution” setting, change the HDMI video resolution to the compatible resolution by pressing [RESOLUTION] or press and hold [B(play)] on the front panel for more than 5 seconds to reset the setting.
•”HDMI Deep Color” is available only when the display device is connected by HDMI cable and supports HDMI Deep Color.
•For “Auto” in “HDMI Deep Color”, using the High Speed HDMI cable is recommended.
•The closed caption of the BD which is recorded by 1080p24 frame is not output from VIDEO OUTPUT (COMPONENT) jacks and VIDEO OUTPUT (VIDEO) jack when "HDMI Video Resolution" is set to "Auto", "Source Direct" or "1080p24".
HDMI Audio SettingWhen using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the device to be connected. Refer to page 45.
Device to be connected | “HDMI Audio Out” setting | Output HDMI audio signal |
Device compatible with Dolby | HDMI Multi (Normal) | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, |
Digital, Dolby Digital Plus, Dolby |
| DTS, or |
TrueHD, DTS or |
| OUT jack. Make the speaker settings on the |
decoding |
| connected AV receiver, etc. |
Device compatible with 3 or | HDMI Multi (LPCM) | |
more channels of audio inputs |
| OUT jack. Make the speaker settings with the |
(not Dolby Digital, Dolby Digital |
| speaker setting items appear after you select “HDMI |
Plus, Dolby TrueHD, DTS or DTS- |
| Multi(LPCM)”. Refer to page 45. |
HD compatible) |
|
|
Device compatible with | HDMI 2ch | |
| from HDMI OUT jack. | |
not compatible with audio input |
|
|
HDMI connection to a TV and | Audio Mute | HDMI audio will be mute, and Dolby Digital/DTS |
digital audio connection |
| bitstream or LPCM will be output from AUDIO |
(optical / coaxial) to an AV |
| OUTPUT (DIGITAL OPTICAL/COAXIAL) jacks |
receiver |
| depending on “Digital Out” setting. Refer to page 46. |
EN | 15 |