BASIC PLAYBACK

Media icon and file name:

: Folder

: audio CD track

: MP3 file

: WMA file

: JPEG file

 

It is recommended that files to be played back in this unit are recorded under the following specifications:

Note for JPEG Playback

• Every press on [ANGLE] will turn the image clockwise by

90 degrees when an image is displayed.

• To change the visual effect for switching the playback

image, press [MODE] once, then use [s/B] or [ENTER]

to switch between “Cut In/Out” and “Fade In/Out”.

• During JPEG playback, press [MODE] twice to change

the size of the playback image, then use [s/ B] or

MP3 / WMA

Sampling frequency:

Constant bit rate:

JPEG

Upper limit:

Lower limit:

File size of image maximum:

32 kHz, 44.1 kHz or 48 kHz

112 kbps - 320 kbps (MP3),

48 kbps - 192 kbps (WMA)

2,560 x 1,920 dots (sub sampling is 4:4:4) 5,120 x 3,840 dots

(sub sampling is up to 4:2:2) 32 x 32 dots

12 MB

[ENTER] to switch between “Normal” (100%) and “Small”

(95%). The size change may have no effect on some files

(e.g. files with a small picture size).

Reading the SD Memory Card

AVCHD MP3

You can play back the AVCHD/MP3/WMA/JPEG files in an SD Memory Card. With the SD Memory Card, you can also enjoy the following functions.

Note

High-resolution JPEG files take longer to be displayed.

Progressive JPEG files (JPEG files saved in progressive format) cannot be played back in this unit.

The system can recognize up to 255 folders / 999 files for CD, 999 folders / 9999 files for BD, DVD and SD Memory Card (including the files other than MP3). When number of folder / files exceeds the limit, they will be recognized by the order recorded.

The name of folder and file can be displayed up to 28 characters. Unrecognizable characters will be replaced with asterisks.

The 9th and deeper hierarchies cannot be displayed for CD and the 10th and deeper hierarchies cannot be displayed for BD, DVD and SD Memory Card.

Extension other than listed below cannot be recognized.

-MP3: “.mp3”

-WMA: ”.wma”

-JPEG: “.jpg” / ”.jpeg”

Some unplayable folders or files may be listed due to the recording status.

With regard to the multi-border BD-RE/-R, additionally recorded sections cannot be recognized.

With regard to the multi-border DVD-RW/-R, additionally recorded sections may not be recognized.

For the SD Memory Card playback, refer to “Reading the SD Memory Card” on page 26.

If a disc contains AVCHD files, the playback of other files which are in the same disc is not available.

-Special additional contents for BD-ROM Profile 1 ver.1.1. (For more information about the special additional contents, refer to the instruction book that came with the disc.)

-BD-Live function (BD-ROM ver. 2 Profile 2.0). (For more information about BD-Live, refer to page 33.)

SD CARD

BLU-RAY DISC PLAYER BD-SP808

Setting the Mode Select

For the playback media to be read by this unit, the correct media should be selected. You can switch the media by following the steps below.

1

In stop mode, press [SETUP].

2

Use [K/ L] to select , then press

[ENTER].

Quick

Mode Select

Disc

HDMI Audio Out

HDMI Multi (Normal)

HDMI Video Resolution

Auto

Component Output

480i

Player Menu

English

3

Use [K/ L] to select “Mode Select”,

then press [ENTER].

26

EN