SPECIAL SETTINGS

Adjusting the Picture

BD-VDVD-V AVCHD

You can adjust the picture quality and store the setting you have adjusted on memory 1-5.

1During playback, press [MODE] repeatedly to select "HD Picture Control" or

"SD Picture Control", then press [ENTER].

“HD Picture Control”:

Effective for the video signal of VIDEO OUTPUT (COMPONENT) jacks (480p, 720p and 1080i) and HDMI OUT jack.

“SD Picture Control”:

Effective for the video signal of VIDEO OUTPUT (COMPONENT) jacks (480i), VIDEO OUTPUT (VIDEO) jack.

2Use [K/ L] to select a memory from “Memory 1” to “Memory 5” to store your setting, then press [ENTER].

Memory1

3Use [K/L] to select an item to be adjusted, then use [{/B] or [ENTER] to adjust the setting.

 

2. Brightness

0

 

 

 

 

 

 

1. Contrast

s +1 B

 

 

 

 

 

 

15. Progressive Mode

 

Auto

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item

Adjustment range

 

Description

Picture Control Setting

 

 

“HD Picture Control“

“SD Picture Control“

 

 

 

 

 

 

1. Contrast

-7 to +7 (0*)

 

Adjusts the difference between the

 

 

 

 

 

bright and dark parts of the picture.

 

 

 

 

 

 

 

 

 

 

 

 

2. Brightness

0 to +15 (0*)

 

Adjusts the brightness of the picture.

 

 

 

 

 

 

 

 

 

 

 

 

3. Sharpness

-2 to +2 (0*)

 

Adjusts the sharpness of the picture.

*1

 

 

 

4. Gamma Correction

-2 to +2 (0*)

 

Adjusts the dark positions of the

*1

 

 

 

 

 

 

 

picture.

 

 

 

 

5. ICR Red

0 to +7 (0*)

 

Adjusts the red color of the picture.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. ICR Blue

0 to +7 (0*)

 

Adjusts the blue color of the picture.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7. ICR Green

0 to +7 (0*)

 

Adjusts the green color of the picture.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8. Color

-7 to +7 (0*)

 

Adjusts the color density of the

 

 

 

 

 

picture.

 

 

 

 

 

 

 

 

 

 

 

 

9. Hue

-7 to +7 (0*)

 

Adjusts the balance between the

 

 

 

 

 

green and red.

 

 

 

 

 

 

 

 

 

 

 

 

10. Black Level *2

 

 

Adjusts the black level.

Off*, Middle, High

Off, On*

 

 

 

 

 

 

11. Noise Reduction

Off*, 1to 3

 

Reduces noise in the luminance signal

 

 

 

 

 

and chroma signal.

 

 

 

 

 

 

 

 

 

 

 

 

12. MPEG NR

Off*, 1to 3

 

Reduces block noise and mosquito

 

 

 

 

 

noise.

 

 

 

 

 

 

 

 

 

 

 

 

13. Edge Enhancer

Off*, Soft, Middle, Strong

Emphasizes the edge of the picture.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjusts the smoothness of the

 

 

 

 

14. Qdeo True Color

Off*, Low, Middle, High

 

picture. It is available for 10 or 12 bit

 

 

 

 

 

 

 

 

 

 

 

 

 

display.

 

 

 

 

15. Progressive Mode

Auto*, Video

 

Selects the setting of the progressive

 

 

 

 

 

scan.

 

 

 

 

 

 

 

 

 

 

 

 

* ) Default setting

 

 

 

 

 

 

 

 

*1) It may take several seconds to reflect the adjusted setting.

 

 

 

 

*2) For optimal video performance, THX recommends the following settings: “Black Level“ = “Off“.

 

 

 

Note

•The setting remains even you turn the unit into the standby mode except unplug the AC cord.

•ICR is the abbreviation of Intelligent Color Remapping.

•Qdeo True Color Processing (QTC) dynamically expands 8-bit video to use the full dynamic range offered by 10 and 12 bit displays, eliminating contours while preserving detail.

•Qdeo True Color is adjustable and effective when this unit is connected with the display device which is compatible with Deep Color.

•If you press [MODE] during playing back Netflix / CinemaNow / Blockbuster, picture control setting will not appear on the TV screen, but the selected setting is available. Please adjust the setting when another mode, then play back Netflix / CinemaNow / Blockbuster.

EN

37