Connecting to the other components

Connecting the

 

connector

Connecting the power cord

 

If you are using other ONKYO components equipped

with connectors, you can control these com- ponents using the amplifier‘s remote controller.

Before connecting

• The amplifier must be connected in the

system hookups for

 

control operations.

 

Each component has two connectors. There is no difference between those connectors.

The components may be connected in any order.

Remote control operation is not possible if only

the remote control cable is connected to

the connectors. Connect the audio connec- tion cables correctly.

The illustration below is the hookup example. With these hookups, you can operate the CD Syn- chro Recording (see “CD/MD synchro recording” on page 8).

Tuner

 

Amplifier

cable

 

Cassette Tape Deck

cable

C-705TX

Supplied

cable

 

REMOTE

 

CONTROL

Insert the AC power cord into a wall outlet. The STANDBY indicator lights.

To wall outlet

STANDBY/ ON

STANDBY

Light

To use the unit with the other Onkyo Sepa- rate Collection series components, follow the connection diagram in the A-905TX/R-805TX instruction manual to connect the unit to the system.

If you press the (OPEN/CLOSE) button while the unit is in the STANDBY mode, the power will turn on and the display will light up auto- matically.

Note

An remote control cable equipped with a 1/

8in. (3.5mm) diameter miniature two-conductor phone plug is included with this unit and with ev- ery tuner and cassette deck that bears the mark.

12

Page 12
Image 12
Onkyo C-705TX instruction manual Connecting Connector Connecting the power cord, To wall outlet