Onkyo DR-L50 ■Connecting to a TV Using the SCART Cable

Connecting to a TV (European model)

Before connecting

•Refer also to the instruction manual of the TV.

•When you connect the DVD Receiver to the TV, be sure to turn off the power and unplug both the units from the plugs before making any connections.

•Connect the DVD Receiver to the TV directly. If you connect the DVD Receiver to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.

• Connect the plugs securely. Incomplete

Insert completely

■Connecting to a TV Using the SCART Cable

Connect the DVD Receiver and your TV using the supplied SCART cable.

If the TV is compatible with S video signals

After completing the steps on page 19, set “Video Out” to “S-Video” using the menu explained in “Customizing the Function Settings” starting from page 68. See page 71 for direct information.

If an RGB monitor is connected to the DVD Receiver

After completing the steps on page 19, set “Video Out” to “RGB” using the menu explained in “Customizing the Function Settings” starting from page 68. See page 71 for direct information.

TV or projector

AV

CONNECTOR

SCART cable

To AV CONNECTOR input terminal

			L	ANTENNA	SURROUND		FRONT SPEAKERS
PREOUT					SPEAKERS				AC INLET
					R	L	R	L
AUDIO
			REMOTE
			CONTROL
			R	FM 75
			AM						DO NOT connect the
SUB	IN	OUT	IN
WOOFER	TV/LINE	MD/CDR/TAPE							power cord at this time.
DIGITAL		VIDEO OUTPUT		AV CONNECTOR
OPTICAL
OUT	IN	S VIDEO	VIDEO

See “Turning the unit on/off with the TV’s power switch — IPM function” on page 27 for Intelligent Power Management (IPM) function.

Use the DIGITAL OPTICAL IN jack in combination with the TV/LINE IN jack. When you use the Input selector

R

AUDIO

OUT

L

to select TV/LINE IN, DIGITAL OPTICAL IN is also activated. When both a digital signal and an analog signal are input, the digital signal takes precedence.

Video (Yellow)

VIDEO

IN TV or projector

S VIDEO

IN

DIGITAL

OUT

OPTICAL

■Connecting to a TV using the Audio/Video connection cable or S video connection cable

If the TV or monitor does not has an AV CONNECTOR input terminal, make video connection using audio/video connection cable.

If your TV has an S video input jack, make the S video connection. The S video connection will provide highter quality picture playback. You can switch between [S1] and [S2] S-video output from the Setup menu on page 71.

L (White)

Audio/video connection cable

R (Red)

S video connection cable

Optical fiber cable

Signal flow

19