Onkyo DR-L50 Note, remote controller, Before operating the, Selecting the Subwoofer mode, Press SW MODE on the remote controller

Press SW MODE on the remote controller.

With the first press of the button, you can check the present setting. Then each press of the button changes the subwoofer mode as follows (a tip on how to select the right subwoofer mode is in parentheses):

→ SW Mode 2 (Factory setting)

(When large–wideband–front speakers

are connected)

↓

SW Mode 3

(When large–wideband speakers are

connected to all channel)

↓

SW Off

(When no subwoofer is connected)

↓

SW Mode 1

(When small–with limited bass signal handling–front speakers are connected)

The normal display resumes in three seconds.

Speaker Setup		LAST M	COND.M	FUNC.M		SEARCH
		ON	MODE
			RECEIVER TV/SETUP
		STANDBY				ACOUSTIC
			INPUT SELECTOR			CONTROL
	SP SETUP	SP SETUP TEST TONE CH SEL
		1	2		3
	SW MODE	AUDIO	ANGLE	SUBTITLE		PROGRAM
		4	5		6
		SW MODE	DISTANCE		UP	CLEAR
You need to set up the speaker configuration for the speaker		LATE NIGHT	T-D/ST	SURROUND
		7	RANDOM		9
			8
	Before operating the	IPM	T-D SETUP		DOWN	TIMER
		TOP MENU	TV VOL		+	MENU
system connected to the SPEAKERS connectors (see page		+10	0		SHIFT
20.)	remote controller	--/---
		TV CH -				TV CH +
		TV				TV
		POWER				INPUT
	Press MODE TV/SETUP.					DVD
		RETURN				SETUP

Notes

•Speaker setup cannot be done if;

– Headphones are connected (see page 42)

•It is not necessary to set the parameters again once you have completed the setup unless you change the speaker configuration.

TV MUTING	TV VOL -
REPEAT	A-B	STEP/ SLOW
TUNING		TUNER PRESET
MODE		MD/ CDR/ TAPE
SLEEP	DIMMER	DISPLAY CLOCK
MUTING		VOLUME

Selecting the number of speaker channels

Note

To check the present setting while the normal display is displayed, press SP SETUP once. To change the setting, press the button repeatedly within three seconds.

Selecting the Subwoofer mode

Remote controller

only

AUDIO

4

SW MODE

Remote controller

only

LAST M

1

SP SETUP

Press SP SETUP repeatedly to select the number of channels for the SPEAKERS system.

Pressing the button repeatedly within three seconds changes the number of channels as follows (the corresponding speaker configuration is described in parentheses):

→Speaker 2ch (Factory setting)

(Front left and right speakers)

↓

Speaker 3ch

(Front left, center, and right speakers)

↓

Speaker 4ch

(Front left and right, plus surround left

and right speakers)

↓

Speaker 5ch

(Front left, center, and right, plus surround left and right speakers)

The normal display resumes in three seconds.

28