Connecting to a TV (Other than European model)

Before connecting

•Refer also to the instruction manual of the TV.

•When you connect the DVD Receiver to the TV, be sure to turn off the power and unplug both the units from the mains before making any connections.

•Connect the DVD Receiver to the TV directly. If you connect the DVD Receiver to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.

•Connect the plugs securely.

•Note that one audio/video connection cable and one S video connection cable are supplied.

Incomplete

Insert completely

■Connecting to a TV (or projector)

Using the supplied audio/video connection cable, make audio connections from the TV/LINE IN L and R jacks to the corresponding audio output jacks on the TV. In the same manner, make video connections from the VIDEO MON OUT jack to the corresponding video input jack on the TV.

If your TV has a S video input jack and/or component video input jacks, make S video connection to the S VIDEO MON OUT jack using supplied S video connection cable and/or make component video connection to the COMPONENT VIDEO OUTPUT jacks using component video connection cable (not supplied). These connections allow you to enjoy higher quality picture playback. Be sure not to disconnect

VIDEO MON OUT.

TV or projector

AUDIO

VIDEO S VIDEO

COMPONENT

 

OUT

IN

IN

 

VIDEO IN

R

L

 

 

Y

PB PR

Note

The signal that comes in from S VIDEO IN is sent to S VIDEO OUT. The signal that comes in from VIDEO IN is sent to VIDEO OUT.

Notes

•Actual labels for component video inputs may vary depending on the TV manufacturer (ex. Y/CB/CR, Y/B-Y/R-Y, etc.).

•In some TVs, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV for optimum performance.

Be sure to set the digital output setting after connection using the Setup Navigator explained in “Setting Up the DVD Receiver” starting on page 27 or the function setting menu explained in “Customizing the Function Settings” starting on page 64.

Video (Yellow)

L (White)

Audio/video connection cable

R (Red)

Y

PB

Component video connection cable

PR

S video connection cable

Signal flow

 

 

 

 

 

 

REMOTE

 

 

DIGITAL INPUT

COMPONENT VIDEO OUTPUT

ANTENNA

MON

 

2 ––VIDEO–– 1

MON

CONTROL

 

DIGITAL

VIDEO 2

VIDEO 1

Y

PB

PR

 

VIDEO 2

VIDEO 1 OUTPUT

 

 

 

 

 

 

OUT

OUT

IN

IN

OUT

OUT

IN

IN

OPT

COAX

 

 

 

 

 

 

 

 

OPT

 

 

 

 

VIDEO

 

 

 

 

 

 

 

 

 

 

 

 

AM

 

 

 

 

 

 

 

S VIDEO

FRONT SPEAKERS

CENTER

SURROUND

 

 

 

 

 

 

 

 

 

R

L

SPEAKER

 

 

 

 

 

 

 

 

 

 

 

 

SPEAKERS

 

SUB

OUT

IN

IN

OUT

IN

IN

 

 

 

 

R

L

 

 

 

 

 

 

 

 

 

 

 

 

DO NOT connect the

 

WOOFER

 

 

 

 

 

 

L

 

 

 

 

 

PRE OUT

 

 

 

 

 

 

 

 

 

 

power cord (mains lead)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO

 

 

 

 

FM

AUDIO

 

 

 

 

 

 

 

 

 

 

at this time.

 

 

 

 

 

 

R

 

 

 

 

75

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO2

VIDEO 1

TAPE

TV/LINE

 

 

 

 

 

 

 

CDR/PC

 

MD/HD

 

 

 

 

 

 

 

See “Turning the unit on/off with the TV’s power switch — IPM function” on page 22 for Inteligent Power Management (IPM) function.

16