Onkyo DR-S2.2 Muting the Sound, Adjusting the Volume, Operating with the unit, Operating with the unit, Operating with the remote controller

Various Functions Common to all the Sources

Turning on/off the SPEAKERS A/ SPEAKERS B Systems (North American and South American models only)

You can turn on or off the speaker systems connected to the FRONT SPEAKERS A and B connectors individually.

Note

When you select “SPEAKER A+B”, the SPEAKER A system reproduces stereo sound automatically. (The listening mode is set to “Stereo.”)

When you select “SPEAKER A”, the listening mode returns to the previous mode.

Operating with the unit

A / B	Press SPEAKER A/B repeatedly.
SPEAKER
	Each press of the button changes the On/Off
	mode as follows:
		→		SPEAKERS A system turns on.
			Only the
				↓
			Only the	SPEAKERS B system turns on.
				↓
			Both the	SPEAKERS A and B systems
			turn on.

Adjusting the Volume

The volume of the front left and right, center, surround left and right, and subwoofer speakers will be adjusted at the same time.

When headphones are connected (see next page), you can adjust the volume of the sound through the headphones.

Operating with the remote controller

Press VOL 5/∞.

Operating with the unit

Turn MASTER VOLUME clockwise to increase the volume, or counterclockwise (anticlockwise) to decrease the volume.

Muting the Sound

Remote

controller only

Press MUTING.

“Muting” appears in the multipurpose display for about three seconds. Also the MUTING indicator flashes in the display during the muting mode.

To restore the sound, press MUTING again.

Tip

If you turn off the unit during muting, and turn it on again, the sound will be restored.

42