Onkyo DR-S2.2 T-D, Press, page), setting of the item, Press UP/DOWN 5/∞ to select the, Activate Theater-Dimensional(see, Adjusting Theater-Dimensionalmode

Activating Theater-Dimensional mode

See “The Input Sources and Available Listening Modes” on page 45.

T-D

T-D

(Indicator and button)

Remote controller Press T-D.

“Theater-Dimensional” scrolls across in the display and the Theater-Dimensional indicator on the unit lights.

Adjusting Theater-Dimensional mode

Press MODE AUDIO first.

	T-D SETUP
	UP/DOWN 5/∞
1	Activate Theater-Dimensional (see
	the steps in the left column of this

page).

Unit

Notes

• Theater-Dimensional mode cannot be activated if;

– Headphones are connected,

– SPEAKERS B system is On (North American and South American

models only), or

– The source is PCM sound with a sampling frequency higher than

48kHz.

2

Remote controller

only

Press T-D SETUP repeatedly to select the Theater-Dimensional item (see on the previous page).

Each press of the button changes the item as follows:

→Lisng. Angle

↓

V. Surr Level

↓

Dialog Mode

↓

The normal display resumes.

• Theater-Dimensional mode will be canceled and the T-D indicator

goes off when:

– Another listening mode is chosen, or

– The input source is switched to a type of source which Theater-

Dimensional mode cannot process.

3	Press UP/DOWN 5/∞ to select the
	setting of the item.

• To change the setting of another item, repeat steps 2 and 3.

•To end the Theater-Dimensional setup, press T-D SETUP repeatedly until the normal display resumes.

47